Re: [AMC-list] shifter arm

[Frank Swygert <farna@xxxxxxxxxxx>]

Unfortunately Frank doesn't know for sure. The arms should be the same length and most likely will interchange, but I can't say 100%. I believe they will because the gear selection indicator and steering columns are the same for six and V-8 cars. That means the shift arms have to be the same length. The bolt hole could be a different size, but I doubt it. In any case, since the length should be the same the M-35 arm could either be modified to fit or used as a pattern to make one. You really just need the correct length so the quadrant on the shifter will match the transmission. There are no detentes on the shifter -- it will move freely up and down. The detentes are on the transmission itself (in the valve body).

-------------
Date: Wed, 7 Mar 2012 12:23:46 -0500
From: Wayne LaMothe<superglider@xxxxxxxx>

Not sure if it interchanges,  maybe Frank can tell us.

Wayne


On Wed, 7 Mar 2012 09:10:52 -0800 (PST) Joe Fulton
<piper_pa20@xxxxxxxxxxx>  writes:

> Wayne,
>
> I have a parts tranny T-35.  If it has the same shifter arm as the
> heavier BW
> trannies, I can send it to you.
>
> Joe Fulton
--
Frank Swygert
Editor - American Motors Cars Magazine
www.amc-mag.com

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com