[AMC-list] Putting an AX-15 behind a 290 (was: Re: Fw:)

[Jim Blair <carnuck@xxxxxxxxxxx>]

I'm looking at putting an AX15 behind my 290 and thought about using the 327 flywheel I have (since 290 ones all seem to have gone to scrap) to put a bigger clutch in, but I also wanted to run an XJ starter, so that may be a pipe dream. Anyone have ideas on this?


From: Ken Ames 
To: Marty Bricker , "AMC, Rambler, Nash,	Jeep
and family" 
Subject: Re: [AMC-list] Fw:
Message-ID: 
Content-Type: text/plain; charset=ISO-8859-1

The bell housing will but the torque converter won't. Others will chime in with
more info on that. 
As for the vavles, there's no difference between 2bbl and 4bbl valves. 

Ken 


Quoting Marty Bricker :

> 
> 
> 
> ----- Forwarded Message -----
> From: Robert Pileggi 
> To: mbrickerusn@xxxxxxxxx 
> Sent: Saturday, November 26, 2011 5:08 PM
> Subject: 
> 
> 
> Will a 904, 277 or 909 transmission bolt up to a 1969 290??? If not, what
> entails a crank modification?? Finally, the 290 is a 2 barrel but was
> converted to a 4 barrel.? Do the valves need to be replaced to run the 4
> barrel?
> ?
> Thanks
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111128/c0b32cee/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com