Re: [AMC-list] Shift lever bushings!

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

I think American Parts Depot carries those bushings.

Joe Fulton



----- Original Message ----
From: John Lunde <lunde@xxxxxxxxxx>
To: "amc-list@xxxxxxxxxxxxxxxxx" <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Tue, October 18, 2011 12:12:40 PM
Subject: [AMC-list] Shift lever bushings!

Hello everyone,

I'm in the process of restoring my 68 AMX and currently I'm rebuilding the BW 
T10 along with the shifter and linkage.

I have just discovered that where the shifter rod bolts to the shifter assembly 
there are 2 rubber bushings that are totally shot!!! I guess these bushings 
reduce the vibration etc. felt by your hand on the shifter ball.

Does anyone know where I can obtain these, or suggest an alternate repair?

Thanks,

John
________________________________________
From: amc-list-bounces@xxxxxxxxxxxxxxxxx [amc-list-bounces@xxxxxxxxxxxxxxxxx] on 
behalf of amc-list-request@xxxxxxxxxxxxxxxxx 
[amc-list-request@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, October 18, 2011 3:00 PM
To: amc-list@xxxxxxxxxxxxxxxxx
Subject: AMC-list Digest, Vol 31, Issue 30

Send AMC-list mailing list submissions to
        amc-list@xxxxxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
        http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
or, via email, send a message with subject or body 'help' to
        amc-list-request@xxxxxxxxxxxxxxxxx

You can reach the person managing the list at
        amc-list-owner@xxxxxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of AMC-list digest..."


Today's Topics:

  1. Re: AMC-list Digest, Vol 31, Issue 24 (Armand Eshleman)
  2. Re: 75 Pacer at Pick'n'Pull (Marc Montoni)


----------------------------------------------------------------------

Message: 1
Date: Tue, 18 Oct 2011 07:43:07 -0500
From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] AMC-list Digest, Vol 31, Issue 24
Message-ID: <325757F53FAB4826999440D71BF17A3F@computzer3>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
        reply-type=original

Joe, I'll get you a photo sometime today.

----- Original Message -----
From: "Joe" <jgray_55@xxxxxxxxx>
To: <amc-list@xxxxxxxxxxxxxxxxx>
Cc: <Jgray_55@xxxxxxxxx>
Sent: Tuesday, October 18, 2011 12:51 AM
Subject: Re: [AMC-list] AMC-list Digest, Vol 31, Issue 24


Aramand. Any photos of the Javelin hood script?? What $$$ do you need?
thanks alot

--- On Sat, 10/15/11, amc-list-request@xxxxxxxxxxxxxxxxx
<amc-list-request@xxxxxxxxxxxxxxxxx> wrote:

> From: amc-list-request@xxxxxxxxxxxxxxxxx
> <amc-list-request@xxxxxxxxxxxxxxxxx>
> Subject: AMC-list Digest, Vol 31, Issue 24
> To: amc-list@xxxxxxxxxxxxxxxxx
> Date: Saturday, October 15, 2011, 4:49 PM
> Send AMC-list mailing list
> submissions to
> amc-list@xxxxxxxxxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> or, via email, send a message with subject or body 'help'
> to
> amc-list-request@xxxxxxxxxxxxxxxxx
>
> You can reach the person managing the list at
> amc-list-owner@xxxxxxxxxxxxxxxxx
>
> When replying, please edit your Subject line so it is more
> specific
> than "Re: Contents of AMC-list digest..."
>
>
> Today's Topics:
>
> 1. Rebel & Ambassador Nash for sale
> really far SOUTH! (Eddie Stakes)
> 2. AMCs in Cuba (Eddie Stakes)
> 3. 304 factory 4 bbl? (Jim Blair)
> 4. Re: 304 factory 4 bbl? (Ken Ames)
> 5. Re: Need a 401 Crank (Armand
> Eshleman)
> 6. WTF files (Eddie Stakes)
> 7. 70 AMC Ambassador DONK (Eddie Stakes)
> 8. Re: 70 AMC Ambassador DONK (Ken Ames)
> 9. Re: Javelin hood script needed (Armand
> Eshleman)
> 10. Remove flexplate from '68 232 w/ automatic
> (Bruce Griffis)
> 11. Re: Remove flexplate from '68 232 w/ automatic
> (Joe Fulton)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 14 Oct 2011 14:25:13 -0500
> From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
> To: <baadassGremlins@xxxxxxxxxxxxxxx>,
> <amc-list@xxxxxxxxxxxx>
> Subject: [AMC-list] Rebel & Ambassador Nash for sale
> really far SOUTH!
> Message-ID:
> <7BECD1B9A6394DDF9A5366E8CD9815C6@piageedc1iqa5q>
> Content-Type: text/plain; format=flowed;
> charset="iso-8859-1";
> reply-type=original
>
>http://carro.mercadolivre.com.br/MLB-201773295-amc-rambler-rebel-1967-v8-302-alcool-_JM
>M
>
>http://carro.mercadolivre.com.br/MLB-201344998-nash-ambassador-1951-impala-belair-buick-ford-1929-sp2-_JM
>M
>
> Eddie Stakes
> 713.464.8825
> eddiestakes@xxxxxxxxxxxxxxxxxxxx
> www.planethoustonamx.com
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 14 Oct 2011 14:27:32 -0500
> From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
> To: <baadassGremlins@xxxxxxxxxxxxxxx>,
> <amc-list@xxxxxxxxxxxx>
> Subject: [AMC-list] AMCs in Cuba
> Message-ID:
> <9BAD044B3A704DE6A53DEAD327AA16B8@piageedc1iqa5q>
> Content-Type: text/plain; format=flowed;
> charset="iso-8859-1";
> reply-type=original
>
> http://travel.webshots.com/photo/2387802860054188876qYjiOY
>
> http://travel.webshots.com/photo/2840318270054188876MRbyXX
>
> http://www.cubaautos.org/car/index/brand/rambler/year/1957/model/custom/id/99
>
> http://www.cubaautos.org/car/index/brand/rambler/year/1959/model/custom/id/20
>
> ole! Damn, how do they keep them looking timeless?
> Eddie Stakes
> 713.464.8825
> eddiestakes@xxxxxxxxxxxxxxxxxxxx
> www.planethoustonamx.com
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 14 Oct 2011 12:46:49 -0700
> From: Jim Blair <carnuck@xxxxxxxxxxx>
> To: <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: [AMC-list] 304 factory 4 bbl?
> Message-ID: <SNT114-W17806BF9D7926538C8BFBFACE10@xxxxxxx>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> I can't find my '71 Jeep Honcho catalog showing 304 4 bbl
> as a factory option (I just remember it was VIN code D)
> Anyone got a CJ catalog with that or did AMC only have the
> SP2P in special packages?
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
><http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111014/f88cdd41/attachment.htm>
>>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 14 Oct 2011 14:14:51 -0600
> From: Ken Ames <ameskg@xxxxxxxxx>
> To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: Re: [AMC-list] 304 factory 4 bbl?
> Message-ID: <1318623291.4e98983bc0637@xxxxxxxxxxxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> My files show VIN 'M' for the 4bbl.
>
> Ken
>
> Quoting Jim Blair <carnuck@xxxxxxxxxxx>:
>
> >
> > I can't find my '71 Jeep Honcho catalog showing 304 4
> bbl as a factory option
> > (I just remember it was VIN code D) Anyone got a CJ
> catalog with that or did
> > AMC only have the SP2P in special packages?
> >
>
>
>
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> >
><http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111014/f88cdd41/attachment.htm>
>>
> > _______________________________________________
> > AMC-list mailing list
> > AMC-list@xxxxxxxxxxxxxxxxx
> > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> >
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 14 Oct 2011 18:09:10 -0500
> From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
> To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: Re: [AMC-list] Need a 401 Crank
> Message-ID: <004401cc8ac6$493d17c0$03fea8c0@xxxxxxxxxxxxxx>
> Content-Type: text/plain;
> charset="iso-8859-1"
>
> Agreed on that experienced machinist thing.
>
> When asked of a hometown machinist to work on AMC engine
> pieces, his comment
> pretty much went like this.
> "You mean this isn't a chevy 350? I'm not sure what you're
> talking about,
> AMC? All the engines around here that we work on are 350
> chevies. I didn't
> know any other engines ever needed a
> rebuild.............OH, wait a minute,
> we work on tractor engine parts here too. We mostly turn
> cranks, size rods
> and do heads cause those blocks usually have wet sleeves.
> but wait I'll ask
> 'turbo' if he knows anything about AMC."
> response from 'turbo', "Yeah I heard of AMC, that's
> American Movie Classics
> on channel 69"
>
> Sigh, I finally did find a great machinist in a little town
> South of here
> who knew exactly what an AMC is and said, "Yeah bring it
> down we'll work on
> it for you."
>
> Armand
>
>
>
> ----- Original Message -----
> From: "Marc Montoni" <Freedom@xxxxxxxx>
> To: <amc-list@xxxxxxxxxxxxxxxxx>
> Sent: Thursday, October 13, 2011 9:35 PM
> Subject: Re: [AMC-list] Need a 401 Crank
>
>
> >
> > markprice242 <wrambler242@xxxxxxxxxxx>
> said:
> >
> >
> > >>WOW, we are cheap...and paranoid it seems!
> ROFLOL.
> >
> >
> > <snicker> Yeah, but paranoid from long
> experience with shop monkeys
> trained at the local Vo-Tech high school whose only
> interest was Chevys (or
> more recently, ricers).
> >
> > Few are the experienced machinists any more who 1)
> actually know how good
> the AMC block really was and 2) understand that it can't
> just be "slapped
> together" like a 350...
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------
> > MARC MONTONI
> > Harrisonburg VA
> > http://FreeVirginia.blogspot.com/
> > Freedom. Responsibility. www.LP.org
> > Cu vi parolas Esperanton?
> > I'd rather push a Rambler than drive a Toyota.
> > Visit www.AMCRC.com or www.AMONational.com .
> > http://RichmondRambler.tripod.com/
> > http://Hasdrubal.tripod.com/Index.htm
> >
> ------------------------------------------------------------------------
> > This work is licensed under a Creative Commons
> Attribution-Noncommercial-Share Alike 3.0 United States
> License.
> >
> >
> > _______________________________________________
> > AMC-list mailing list
> > AMC-list@xxxxxxxxxxxxxxxxx
> > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
>
>
> ------------------------------
>
> Message: 6
> Date: Fri, 14 Oct 2011 21:21:20 -0500
> From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
> To: <baadassGremlins@xxxxxxxxxxxxxxx>,
> <amc-list@xxxxxxxxxxxx>
> Subject: [AMC-list] WTF files
> Message-ID:
> <6D8329F431654BFB939500804A8B1AE8@piageedc1iqa5q>
> Content-Type: text/plain; format=flowed;
> charset="iso-8859-1";
> reply-type=original
>
> Dad needs to kick the kid out of the house:
>
> http://lafayette.craigslist.org/pts/2645807355.html
>
> =========================
> CLASSIC UGLY-AS-DIRT BLUE AMC GREMLIN FOR SALE, SHINY BLUE
> BENCH SEAT, ENOUGH ROOM TO FIT
> AT LEAST 3 PEOPLE AND MAN, YOU'LL NEVER HAVE TO WORRY ABOUT
> THIS CLASSIC BEING STOLEN!
> SITTIN IN THE YARD, WAITING FOR THE RIGHT OFFER TO COME
> ALONG....
>
> JUST TWO HOURS FROM LAFAYETTE, LA...
>
>
>
> JUST KIDDING DAD!!
>
>
>
> a.. Location: LIVINGSTON, LA
> b.. ===========================
> Eddie Stakes
> 713.464.8825
> eddiestakes@xxxxxxxxxxxxxxxxxxxx
> www.planethoustonamx.com
>
>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 14 Oct 2011 21:13:41 -0500
> From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
> To: <baadassGremlins@xxxxxxxxxxxxxxx>,
> <amc-list@xxxxxxxxxxxx>
> Subject: [AMC-list] 70 AMC Ambassador DONK
> Message-ID:
> <7E5625809F5540868D706C3EB14B4E05@piageedc1iqa5q>
> Content-Type: text/plain; format=flowed;
> charset="iso-8859-1";
> reply-type=original
>
> I never knew AMC made a Donk.
>
> http://jacksonville.craigslist.org/cto/2575853325.html
>
> Eddie Stakes
> 713.464.8825
> eddiestakes@xxxxxxxxxxxxxxxxxxxx
> www.planethoustonamx.com
>
>
>
> ------------------------------
>
> Message: 8
> Date: Sat, 15 Oct 2011 01:15:28 -0600
> From: Ken Ames <ameskg@xxxxxxxxx>
> To: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>,
> "AMC, Rambler,
> Nash, Jeep and family"
> <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: Re: [AMC-list] 70 AMC Ambassador DONK
> Message-ID: <1318662928.4e9933105da27@xxxxxxxxxxxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Other d*nk words come to mind.
>
> Ken
>
>
> Quoting Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>:
>
> > I never knew AMC made a Donk.
> >
> > http://jacksonville.craigslist.org/cto/2575853325.html
> >
> > Eddie Stakes
> > 713.464.8825
> > eddiestakes@xxxxxxxxxxxxxxxxxxxx
> > www.planethoustonamx.com
> >
> > _______________________________________________
> > AMC-list mailing list
> > AMC-list@xxxxxxxxxxxxxxxxx
> > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> >
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Sat, 15 Oct 2011 09:44:30 -0500
> From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
> To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: Re: [AMC-list] Javelin hood script needed
> Message-ID: <000701cc8b48$f34e4180$03fea8c0@xxxxxxxxxxxxxx>
> Content-Type: text/plain;
> charset="iso-8859-1"
>
>
> I found a couple.
> One of them is still in pretty good shape, has all three
> mounting pins.
> Let me know if you want it.
>
> Armand
>
>
> ------------------------------
>
> Message: 10
> Date: Sat, 15 Oct 2011 11:10:54 -0400
> From: Bruce Griffis <bruce.griffis@xxxxxxxxx>
> To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: [AMC-list] Remove flexplate from '68 232 w/
> automatic
> Message-ID:
> <CAEGO9uqoxXysJrXXfyiQjJ=hytSEe7dSODidNT1R68PXkFbzSQ@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=UTF-8
>
> cross-posted on theamcforum:
> I started working on my engine swap. I pulled the automatic
> off the
> 232. No problems. I removed the bellhousing. I'm trying to
> remove the
> flexplate but running into issues. When I try to turn the
> 9/16" bolts,
> the who flexplate revolves. Should I brace a screwdriver
> between some
> teeth to hold it still? Any tricks? If compression is good,
> should the
> flexplate turn as I try to remove the bolts?
>
> Any hints and tricks? Or just hit all the bolts with
> penetrating oil,
> brace against the teeth (I'm not re-using the flexplate,
> I'm swapping
> to manual) and use a big ol' wrench?
>
>
> ------------------------------
>
> Message: 11
> Date: Sat, 15 Oct 2011 08:49:10 -0700 (PDT)
> From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
> To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
> Subject: Re: [AMC-list] Remove flexplate from '68 232 w/
> automatic
> Message-ID: <1318693750.63493.YahooMailRC@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=iso-8859-1
>
> Bruce,
>
> Those flexplates are pretty fragile.?? I suggest that you
> pull on spark plug and
> insert a long piece of rope (3/8th inch cotton or nylon
> will work).?? The rope
> will act to cushion the piston against the cylinder head
> and jam the piston so
> the crank can't turn.? Leave one end of the rope sticking
> out of the spark plug
> hole so you can remove it easily when you have removed the
> flexplate.
>
> Joe Fulton
>
>
>
> ----- Original Message ----
> From: Bruce Griffis <bruce.griffis@xxxxxxxxx>
> To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
> Sent: Sat, October 15, 2011 8:10:54 AM
> Subject: [AMC-list] Remove flexplate from '68 232 w/
> automatic
>
> cross-posted on theamcforum:
> I started working on my engine swap. I pulled the automatic
> off the
> 232. No problems. I removed the bellhousing. I'm trying to
> remove the
> flexplate but running into issues. When I try to turn the
> 9/16" bolts,
> the who flexplate revolves. Should I brace a screwdriver
> between some
> teeth to hold it still? Any tricks? If compression is good,
> should the
> flexplate turn as I try to remove the bolts?
>
> Any hints and tricks? Or just hit all the bolts with
> penetrating oil,
> brace against the teeth (I'm not re-using the flexplate,
> I'm swapping
> to manual) and use a big ol' wrench?
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
>
>
> ------------------------------
>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
>
> End of AMC-list Digest, Vol 31, Issue 24
> ****************************************
>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com



------------------------------

Message: 2
Date: Tue, 18 Oct 2011 08:56:09 -0400
From: Marc Montoni <Freedom@xxxxxxxx>
To: amc-list@xxxxxxxxxxxxxxxxx
Subject: Re: [AMC-list] 75 Pacer at Pick'n'Pull
Message-ID: <20111018130400.2C85A8DB0F08@xxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"


Joe Fulton <piper_pa20@xxxxxxxxxxx> said:

>>No problem.? Just go to your AMC dealer and order two quarter panels and a
>>bumper.?


Well maybe not an AMC dealer but here's one side:

http://amxbruce.com/com/html/FMPro?-db=EZpub&-lay=pages&-format=BP.htm&-op=eq&partrefsec=7279&-Max=40&-sortfield=PartOrder&sortorder=ascending&-find#7410


-- Marc




------------------------------

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


End of AMC-list Digest, Vol 31, Issue 30
****************************************
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com