Re: [AMC-list] AMC Bendix disk brakes - waddaya need to swap 'em?

[markprice242 <wrambler242@xxxxxxxxxxx>]

----- Original Message -----
> From: "Sandwich Maker" <adh@xxxxxxxxxxxxxxxxx>
> To: AMC-list@xxxxxxxxxxxxxxxxx
> Sent: Thursday, October 6, 2011 12:25:44 PM
> Subject: Re: [AMC-list] AMC Bendix disk brakes - waddaya need to swap
> 'em?
> " Date: Wed, 05 Oct 2011 18:27:15 -0400
> " From: Frank Swygert <farna@xxxxxxx>
> " I'd go with the Scarebird setup mainly due to parts availability in
> the
> " future.
> dave's '00 mustang assemblage is coming up fast on the outside...
To this I totally agree, Few people really comprehend what WE HAVE in our cars that other makes peeps would kill for! THE ABILITY TO CHANGE OUT SPINDLES WITH FOUR BOLTS ! The set of plates I have were made for a cost of about $35 a pair once the design was done.I paid $50 for them and maybe $10 in shipping. If Dave can get his plates made for $50 or less and put up a few pictures. I'd wager sales would do fairly well. I looked at the Calipers years ago and at that time a new pair was available for $190 by doing some diligent searching. They came in red,black,and plain. The powder coated ones had ponys on them IIRC and you could get a plain cast with no pony. ALL the Ford online sites had them. The only issue is you will not get this stuff inside anything less than a 17" wheel, maybe, just maybe the correct offset 16" but not sure on that. Mark Not sent from my Android phone with Gingerbread.... 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111006/9f8a2006/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com