Re: [AMC-list] carb spacer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [AMC-list] carb spacer



Yes Dad.   :)  

Joe Fulton



----- Original Message ----
From: russ hathaway <russh97309@xxxxxxxxx>
To: Rambler Nash Jeep and familyAMC <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Fri, March 4, 2011 11:21:59 AM
Subject: Re: [AMC-list] carb spacer

 I needed a spacer for my Carter so I took some flat stock and traced my old 
gasket on the material. With my Dremel I was able to cut it out in about 20 
mins. I drilled the hose nipple opening and tapped it in less than 5 minutes. 
Less time than to drive down to the parts place and talk to the parts pullers.
Invest in tools and learn how to use them, you would be amazed how easy it is to 
make some obsolete parts......Russ 


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110304/294f1983/attachment.htm>

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated