Re: [AMC-list] Flywheel resurface what else

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

The car has a 195.6 engine.  It has a rope seal.

Joe Fulton



As has been pointed out, it is a 2 part seal.  (NOT an actual "rope" seal 
though) and should seep almost nothing when it is fresh and operating properly.  

Be sure and find a brass drift if you are going to do this as it will allow you 
to bump the seal upper half without damaging the crank... if you nick the crank 
even slightly where the sealsurface of the rear main rides you will NEVER be 
able to keep a seal from leaking... so DON't use a screwdriver or steel 
punch.    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110208/c8093317/attachment.htm>

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com