Re: [AMC-list] Need help with master cylinder removal 1965 American, non power brakes...

[tom jennings <tomj@xxxxxxx>]

On Wed, May 26, 2010 at 9:28 AM, Jim Blair <carnuck@xxxxxxxxxxx> wrote:

>
> It comes off the pedal and if the new one doesn't have a rod, undo the clip
> holding the innards to the master cyl and it pulls out. They used to make
> them so they pulled out, but they discovered that if you had to pump fast
> and the master stuck down you couldn't get pedal back fast enough to
> recover.
> "errrrrrrrrRRRRRR crunch!"
>

OK, that would suck :-)


On my 63's they just "come out". However, you have to pull! There's a spring
clip in the piston part that grips the pushrod.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100526/f6e2096a/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com