Re: [AMC-list] AMX rear

["Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>]

Keith,

No one else chimed in here so I'll give it a try.

You'll need bearings for the pinion gear and for the differential carrier at
a minimum.
If I were doing it, I'd replace the axle bearings and seals along with the
rest of the bearings and seals.
You'll need a crush sleeve for the pinion.
Get a TSM for your year AMX and read the axle section.
Vendors on Ebay sell different kits for rebuilding AMC 20 axles. Check them
out.
There must be several sites on the web that give a blow by blow method of
rebuilding an AMC 20 and swapping gears.

Armand


----- Original Message ----- 
From: "Keith Evenson" <epd@xxxxxxxxxxxx>
To: "AMC List" <amc-list@xxxxxxxxxxxx>
Sent: Thursday, May 13, 2010 11:55 AM
Subject: [AMC-list] AMX rear


> So I picked up a set of 3.54 gears to put in my 68 AMX. What all will
> I need for bearing's ect to do the job?
>
> Thanks,
>
> Keith
>
>
>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG.
> Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date: 5/15/09
6:16 AM
>
>

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com