Re: [AMC-list] 195.6 cranks, flat vs. volcano, manual transmission fitment -- cast iron don't lie

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: tom jennings <tomj@xxxxxxx>
" 
" []
" 
" (The bore hole in the flat crank is about 1"; I can't measure right now, the
" engine's bolted to a stand.)

iirc the bore on 199/232/258 and 4.0 to '91 is 1.063".  maybe same?

" FACT CAST IN IRON: The 1963 T-96+OD that came in my '63 American, and a T-96
" from a 1964 Classic, require 3/4" pilot bushings. I can't vouch for other
" years.

afaik every amc warner stick up to '75 takes a 0.750" pilot.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com