Re: [AMC-list] Energizer Cam

["Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>]

Bruce,
Thanks for the information. I did find a website for Crane, I'm going to
contact them.
My plan is to try to get a bit lopier idle, hopefully a little bit better
performance and retain the fuel mileage or improve with any luck.
I'm also installing a performer intake and Carter AFB 500 cfm. I was
thinking about installing a chain and gears that offer 4 degrees cam timing
change by moving the crank gear. Does that sound good?
Armand


----- Original Message ----- 
From: "Bruce Hevner" <scramblr@xxxxxxxxxxx>
To: <amc-list@xxxxxxxxxxxx>
Sent: Monday, March 22, 2010 6:33 AM
Subject: [AMC-list] Energizer Cam


> Of course Crane (as we knew it) is long gone but you can still get info on
a
> lot of their parts on line.
>
> The Crane "Energizer" line was made for quite a few makes.
>
> The 272 grind was pretty similar in specs for all makes. Looks like
"about"
> 214'-216'@.050 and .450-.500 lift, 110' lobe separation. Mild cam with RPM
> range of 1500-1800 and4500-5000 (depends on make).
>
> Would be good choice in a straight drive 304 but a little on the big side
> for a stock auto, but still definitely streetable depending on what kind
of
> performance you're after.
>
> If it was going in a STOCK 304 auto I'd back off about 5' in duration.
>
> But HEY,,, that's just ME!!
>
> Bruce Hevner
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/201003
22/c28a4ea9/attachment.htm>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG.
> Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date: 5/15/09
6:16 AM
>
>

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com