Re: [AMC-list] 151 4cyl trans to 258-6 interchange question

[Ken Ames <ameskg@xxxxxxxxx>]

Will it have the GM size input shaft if its from a 4 cylinder?
Might have to swap that to AMC size.

Ken


Quoting "(Sandwich Maker)" <adh@xxxxxxxxxxxxxxxxx>:

> " From: Clair Maughan  heymaun@xxxxxxxxxxxxx   
> " 
> " Could you also check on the 4 speed, if the AMX is heavier duty than
> " the one behind the 4 cyl.  
> 
> afaik it's exactly the same, a warner sr4.  it's about at its limit
> with a 258 so i wouldn't be too spirited [sic] with it...  it's also
> relatively wide ratio, meant for tall axle gears.
> 
> it's the same bolt pattern as a warner t5, and you can swap a mustang
> 5.0 box in with some work.
> ________________________________________________________________________
> Andrew Hay                                  the genius nature
> internet rambler                            is to see what all have seen
> adh@xxxxxxxxxxxxxxxxx                       and think what none thought
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> 


_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com