Re: [AMC-list] Hot rod 258 questions

[Jim Blair <carnuck@xxxxxxxxxxx>]

We carry ARP ones. At NAPA but I probably have a set from the '80 Eagle I parted. That's also the best way to get rid of the plastic cover besides a 4x4 shop aluminum conversion cover. (I did that on my '82 Spirit till I do the 4.0 l head swap)
   I have the '80 head & cover up for $35. Block is still also complete except oil pan and pump $40


Subject: Re: [AMC-list] Hot rod 258 questions
Message-ID: 
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
 
Take a bolt to an industrial fastener supply house (something like Fastenal) and see if they don't have something similar. I know the bolts have a bit of a shoulder on them, but I believe standard grade 8 bolts should work fine. 
 
------------
Date: Wed, 03 Feb 2010 15:25:58 -0600
From: Todd Tomason 
 
The 7/16" head bolts are hard to find and expensive.  The only place I've 
ever found them was the dealer.  Maybe go pull a set off an Eagle in the 
junk yard.  You should be able to use them at least twice.
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/201469227/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100204/973f05b3/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com