Re: [AMC-list] 2bbl intake/exhaust manifold woe's

[wrambler242@xxxxxxxxxxx]

Me neither. Never crossed my mind. Will a 69 starter bolt up to a 64?  I'd offer one if I had two things. 
1.  An idea of if it would fit
2. An idea as to where the one off of mine is!

I know I never sold or junked it but, where is it?  
------Original Message------
From: Tom  Jennings
Sender: amc-list-bounces@xxxxxxxxxxxx
To: AMC, Rambler, Nash, Jeep and family
ReplyTo: AMC, Rambler, Nash, Jeep and family
Subject: Re: [AMC-list] 2bbl intake/exhaust manifold woe's
Sent: Nov 22, 2009 2:16 PM

> Tom's engine must have come from a 69-71 donor.
>
>
Yup. As I said at the start, a 1970 232ci six in a 1963 Classic chassis (and
bolted to a 1965 BW air cooled auto trans).

There's a "Ford type" solenoid on the driver side inner fender, hence the
one fat wire to the motor.

I didn't realize this was an issue; I didn't realize that Delco-Remy types
with the solenoid on the starter was used on the pre-72's.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20091122/0b2286c9/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Sent from my BlackBerry® wireless device from U.S. Cellular
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com