Re: [AMC-list] Today is messing with the trunk day!

[Bruce Griffis <bruce.griffis@xxxxxxxxx>]

I took some pictures looking down into the trunk. Made some areas that
need more attention a little more apparent. Then I crawled underneath
to take pictures. Man!!!! The light from the camera really brings out
bad spots! Think I'll be spending some time underneath the car with a
wirebrush, some rust converter and some paint. Maybe a little more
fiberglass for the bad spot. Funny how the light shines right through
bondo and fiberglass! You can see exactly where the rust spot and the
pinholes are.

Oh well. I did not hit it with primer yet. I want to get the inside of
the trunk a little smoother and hit it with glazing putty before
painting.

On Sat, Oct 24, 2009 at 7:05 PM, Frank Swygert <farna@xxxxxxx> wrote:
> Don't be afraid to put more than one layer of cloth and resin on. Sounds
> like you got it all under control, and smoothing with the bondo was a nice
> touch! Don't forget to paint or undercoat the bottom if you can get to it.
> Seal it up on both sides so no air or moisture can continue the rusting!
> --------
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com