The stuff I have used is call Brushable Seam Sealer I believe. It comes in a can and can be applied with a putty knife and smoothed out with a brush dipped in solvent. Joe Fulton --- On Fri, 5/8/09, Guhanick, Steve H. <steve.guhanick@xxxxxxxxxxxxxxxxxxxxx> wrote: > From: Guhanick, Steve H. <steve.guhanick@xxxxxxxxxxxxxxxxxxxxx> > Subject: [AMC-list] seam sealant > To: "amc-list@xxxxxxxxxxxx" <amc-list@xxxxxxxxxxxx> > Date: Friday, May 8, 2009, 12:06 PM > Joe: > > Does the 3M stuff go on like caulk out of a tube or is it > formatted in sheets? This application has a connecting > plate over it. > > Thanks > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20090508/c786d490/attachment.htm> > _______________________________________________ > AMC-list mailing list > AMC-list@xxxxxxxxxxxx > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com