Re: [Amc-list] '63 Ambo questions

[Wrambler242@xxxxxxxxxxx]

>From Wikipedia.

Bore size is cast on the top of the block near the back of the right bank cylinder head. This is difficult to see with the engine installed in a Rambler due to the close proximity of the heater. It can be done with a small inspection mirror

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
" I realize that death is inevitable.
I just don't want to be around when it happens! "

 -------------- Original message ----------------------
From: Victor the Cleaner <jonathan@xxxxxxxxxx>
> In my continuing effort to achieve a quickie rehabilitation of this ride...
> 
> 1. Can anyone tell me offhand what the parking brake cable lengths are?
> 
> 2. I can't quite seem to recall from ages past how to distinguish the 
> 287 and 327 from the outside.  Was it a number cast into the rear of the 
> block (i.e.  under the flex plate)?
> 
> 3. Has anyone ever come up with a modern replacement for the block heater
> for the 287/327 (2" hole), or am I stuck buying NOS?
> 
> thx.mch.
> jl
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list