Re: [Amc-list] need some ambo parts

[Wrambler242@xxxxxxxxxxx]

Yeah, I knew that, trakbar comes from Jeep vernicular and seems to have stuck,
Same thing.
Prothane makes polys for the 65-66. So I'll probably go that way.
Even if I swap out the axle out I'll probably stay with a panhard and truck arms or some other confiuration.

That's one reason I may leave tha back half of the vert rusty for a while yet.
If I decide to go to my full plans it will likely get a Fraud 9" with truck arms and the Turbo 400 behind the 327.

Maybe some other rear suspensionw will tickle my fancy by then...

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
" I realize that death is inevitable.
I just don't want to be around when it happens! "

 -------------- Original message ----------------------
From: Tom Jennings <tomj@xxxxxxx>
> It's a panhard rod.
> 
> The rubber bushings go bad, so might as will find a pair now! They're 
> just straight bushes so they should not be hard to fab if you cant find 'em.
> 
> Miraculuously, mine do not rattle and they are original.
> 
> 
> 
> 
> Wrambler242@xxxxxxxxxxx wrote:
> > Depends on how big a hurry you're in.
> > I have one here.
> > Let me know.
> > If your in a big hurry I can pull the one from the vert and replace it with 
> the one from the parts car later.
> > I hadn't thought of selling such a thing, so make me an offer.
> > 
> > --
> > Mark Price
> > Morgantown, WV
> > 1969 AMC Rambler, 4.0L, EFI, T-5
> > 2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
> > " I realize that death is inevitable.
> > I just don't want to be around when it happens! "
> > 
> >  -------------- Original message ----------------------
> > From: Wayne E LaMothe <superglider@xxxxxxxx>
> >> I was just working on the brakes on the 66 Ambo wagon and noticed that
> >> the bar that goes behind the axle is bent.  I forget what you call it but
> >> it is part of the torque tube setup.  On my Jeep I would call it a
> >> trackbar.  And looking further, I believe the torque tube itself has a
> >> dimple in it too.  The "trackbar" is rubbing on the diff cover so I know
> >> the bend is not supposed to be there.  Anyone have a "trackbar"?  I know
> >> there is one on a 66 wagon at Leon's in VA and I may have to run there
> >> for other parts but would prefer not to have to.
> >>
> >> Wayne
> >> Wayne & Lisa (Skeezix), Bolton Landing, NY,
> >> http://www.superglider.thinkhost.com/
> >> AMO#8454,  82 SX/4, 258 auto
> >> 69 Ambo coupe, 401, M12, 66 Ambo 990 Wagon, 327,PW,PB,PS,posi,AM/FM,AC
> >> 2003 FLHTCI, 2000 WJ Limited
> >> 2001 Cherokee, 2002 STS Northstar
> >> ____________________________________________________________
> >> Click to get free info on remodeling your kitchen.
> >> 
> http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3mXZNTQKfUB1JmJ3uKv2iGPETpvBhH
> >> EPzU34VhAHWDkIjH9U/
> >> _______________________________________________
> >> Amc-list mailing list
> >> Amc-list@xxxxxxxxxxxx
> >> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
> > 
> > _______________________________________________
> > Amc-list mailing list
> > Amc-list@xxxxxxxxxxxx
> > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list