Re: [Amc-list] Big motor small heads,,,

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Wrambler242@xxxxxxxxxxx
" 
" Have you looked at the rugged ridge header for the 2000-06 4.0L's?
" Near as I can tell they are not equal length, perhaps they are dyno tuned?

just peeked.  the front 3 don't look bad...

more likely they squeezed what they could into the space they had to
work with.  bet it's designed to drop into place of the iron
manifolds.

" --
" Mark Price
" 
"  -------------- Original message ----------------------
" From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
" > " From: Wrambler242@xxxxxxxxxxx
" > " 
" > " Idealy the single cylinder pipes would all be the same length to start with.
" > 
" > that would also be the peakiest.  since the front half and back half
" > are even-firing 3s, grouping each separately then combining with a
" > y-pipe allows you to set different lengths, spreading out the
" > cross-scavenging peaks.  'tri-y' headers always give the broadest
" > powerband.
" > 
" > combining the iron manifolds with a y-pipe would be an interesting
" > compromise.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list