> I'm not arguing that the 4.0 head isn't a good swap, > just that without changing the cylinder volume, you are not > altering the engine's compression ratio. > Compression ratio is a measurement comparing the cylinder > volume with the piston at BDC vs TDC. The only way to change > that is to physically alter the size of the cylinder. Static compression ratio is the ratio between total volume at BDC and TDC as you say, but Dynamic compression ratio is a bit different, and much harder to calculate... For one thing, you have to take valve timing into account. If the intake valve is still open after BDC (which it commonly is) then you need to consider where the piston actually is when the valve closes. I thought that Dynamic compression also included Volumetric Efficiency, making it a comparison between cylinder pressure just as the Intake closes, and at TDC. This would make it a really good indicator of power potential. After all, an engine with a higher VE will achieve higher final cylinder pressures, for a given compression ratio. Unfortunately, I can't find a reference to back up my understanding! and when I think of it some more, it occurs to me that the same argument could be made to say a turbo motor has a really high compression ratio... So I guess VE doesn't actually enter into the dynamic compression ratio calculation, even though it does have a big influence on final cylinder pressures..... Cheers, Dave _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list