Re: [Amc-list] Where oil filler tube connects to block - gasket and rubber piece

["Bruce Griffis" <bruce.griffis@xxxxxxxxx>]

Thanks! That sounds exactly like what I'm looking for. I'll give
Galvin's a shout tomorrow.

On Wed, Sep 17, 2008 at 9:42 PM, Joe Fulton <piper_pa20@xxxxxxxxxxx> wrote:
> Bruce,
>
> I checked my Felpro gasket kit.  The oil filler tube gasket you need is a thick o-ring with square shoulders.  It looks like a section cut from flexible rubber hose the same diameter as the OD of the oil filler tube.  Maybe Galvin would have it if he broke up a set of Felpro engine gaskets for you (or maybe has a broken set and sells separate gaskets) but you could probably get a reasonable substitute from NAPA or some other large auto parts store in the o-ring collection.
>
> Good luck,
> Joe Fulton
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list