Re: [Amc-list] seat belt install

["Chris Peters" <cpeters1@xxxxxxxxxx>]

I told ya it would be hard to describe.  I just did it the other day, and we
have he same setup, so 

It is easier to see if you took the belts out yourself.  See if you can it
all in place before you install it.  Then, clamp the bolt in a vise with the
rubber cover facing up and the belt coming towards you.  Then, fold the belt
back away from you, so it folds over the cover, and over the bolt head.
Now, you should see a loop of belt material, grab the belt and pull out a
loop 3-4 inches.  Pull the cover some, and now you should be able to get to
the bolt head with a dogbone wrench.  Bolt in place, pull the loop back out,
and fold it back into place.   The folding the key here.

If that still does not work, I'll take some pics for you.  Email me direct
if you like.  cpeters1@xxxxxxxxxx

-----Original Message-----

Date: Tue, 22 Jul 2008 16:47:58 -0500
From: Keith Evenson <epd@xxxxxxxxxxxx>
Subject: Re: [Amc-list] seat belt install
To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
Message-ID: <FB242AFD-CBB3-49F4-B98A-08339DAA9C36@xxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"

That is what I thought but the bolt on mine goes thru a loop on the  
back side of the seatbelt loop. So the cover loop has to be in place  
when you put the bolt in the hole.

Keith


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list