Richard Estermyer wrote: > Is there a simple way or a special trick to remove the windows from the doors of a Gremlin (or other)?Blessings,Richard Richard Estermyer javelinman74@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Yeah -- a trick! It's in the TSM. I can't recall it exactly. Lessee... Crank the window most of the way up. Use masking tape loops, over the top of the door frame down to the glass. That holds that glass up when you take out the regulator. Take out the regulator. There's access holes, maybe you crank the window such that the bolts are reachable throguh the hole 'afore you tape it up... then you wind the regulator down and take it out. Glass is hanging on the tape. With the regulator out, you can take off the tape, drop the glass down deep in the channel, cock it and it comes out at an angle up the slot. TSM is invaluable here! _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list