Re: [Amc-list] Balancing and Backspacing

[Wrambler242@xxxxxxxxxxx]

Probably fit the big cars eaier than the small cars.
For that piddling amount I'd try a wheel spacer and if that does not allow enough thread engagement on the studs but gives you clearance, then I'd pull the spindle and space it out a 1/4". 

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrc II
" Chronic Pain Hurts"

 -------------- Original message ----------------------
From: Archimedes <Freedom@xxxxxxxx>
> 
> JOE FULTON <piper_pa20@xxxxxxxxxxx> said:
> 
> >Also, I measured the backspacing on the Turbocast II
> >wheels.  It is 4 inches.  Common backspacing on AMC
> >wheels is 3 3/4 inches as I recall, so these wheels
> >may have trouble fitting on trunnion cars.
> 
> I don't know.  Chris Ziemnowicz has them on his 67 Amboat 'vert:
> 
> http://faculty.concord.edu/chrisz/hobby/67-Amb-items/VA-AftonFull.jpg
> 
> -- Marc
> 
> 
> 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list