Re: [Amc-list] flat tappet oil
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Amc-list] flat tappet oil
- From: jayscore@xxxxxxxxxxxxx
- Date: Tue, 18 Mar 2008 09:17:09 -0500
How are the detergent levels? I've always been told not to use racing oil in a daily driver because there is not enough detergent in the oil to pick up dirt and contaminants.
Todd
----- Original Message -----
From: Davis Martin <martin-davis@xxxxxxxxxxxxx>
Date: Tuesday, March 18, 2008 8:07 am
Subject: Re: [Amc-list] flat tappet oil
> Ok That is not a normal walmart shelf oil. Also Phophorus is not
> zink I didn't see it list ZZDP levels.
> It is also not under 2.50 a QT like the oils at walmart these
> folks are looking at.
> Here is what I use. My machinist uses this when Joe Gibbs oil
> is too expensive.
> http://www.valvoline.com/racing/
> Note the Zink level is .12 and the phophorous level is .12.
> The conventional oil is 3.50 a QT at my local Napa auto parts
> store. Davis
>
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
Back to the Home of the AMC Gremlin