Re: [Amc-list] Trans experiment...! (T-14 + torque tube?)

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Frank Swygert <farna@xxxxxxx>
" 
" On the non-OD trannys the adapter is the tailshaft housing. Check the length first, then check for fit. I have a suspicion that you're out of luck even if the adapter does fit. The T-14 main case is probably longer than the T-96. Of course if it's only say an inch longer (or less), it won't hurt to push the axle back that much. If it's any more than an inch longer there would likely be problems with the panhard rod and clearances. 

the t14 main case is more than 2" longer than the t96, but the whole
[non-o/d] tranny is ~2" shorter.

" -----------
" From: Tom Jennings <tomj@xxxxxxx>
" 
" It just occurred to me... I have an old T14 (open driveline),
" plus a T96, OD, with TT adapter... this weekedn I'll see if the
" overall length is right, and if that adapter might fit the T14..
" 
" Are all the TT adapters the same?

the o/d ones might be, as the o/d themselves are.  non-o/d adapters
aren't.

i was told that an o/d t14 was exactly the same length as the t96...
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list