Re: [Amc-list] AMC 304 V8 Stroker Build (327-cid AMC V8!) - Final Answer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Amc-list] AMC 304 V8 Stroker Build (327-cid AMC V8!) - Final Answer ( Why ... Why Not!)



Hi Davis,
  I am building the 304 stroker, because I have nearly ALL of the parts for it, and they are nearly ready to go together, and so, the trouble and expense won't be all that much 'now', as compared to doing a 360 (which I have) or a 401 (which I don't).
   
  I began engineering that stroker engine 12+ years ago and want to finish it and get it running.  It's been moth-balled for about 9 years, since the twin-turbo race car project was nixed ... and it's time to finish it.
   
  Were I to start with the current 360 in my Jeep (60K on it), the cost would be A LOT higher in rebuilding, especially to the specs that the 304 is built to.  I looked into putting the 390 crank/rods into the 360, to make a 383" stroker, but I would have more $$ to put into the 360 block to prep it.  The 304 block is nearly done and the build up is internally balanced, weight-matched on components and should make more power than most would expect.  Garrett Ghezzi's SS/C '69 AMX with a 290 v8 (0.060" over) can attest to that.  He's pushing close to 480 HP and just under 400 lb/ft torque with a super stock engine & square port '69 heads.  He routinely beats out 401-powered AMC's with that car.
   
  While I don't expect my stroker 304 to make that kind of power, I am estimating that it will be in the 275-300 HP range and torque should be quite nice for the Jeep.
   
  Please note that my current 360 makes about 200 HP roughly, with 4-bbl carb/intake, headers & single exhaust and a stock 8.25:1 producing a whopping 160-hp (stock).  The stock 9.0:1 304's made 210 hp and 10.0:1 290's w/4-bbl made 225 hp.
   
  Sincerely,
  Greg Taylor 
  
Davis Martin <martin-davis@xxxxxxxxxxxxx> wrote:
    Ok but Why go thru all this trouble and expense when a stock 360 will make about the same power? 
304 just doesn't make sence to me as there are so many 360's available. Do all that same stuff to a 360 and now you have something. I won't even get into 401's 


Greg Taylor wrote:
Good morning all,
Here is the final build-up breakdown for my stroker 304? 
   
  Sincerely,
Greg Taylor :) <><

And the testimony is this, that God has given us eternal life, and this life is in His Son. He who has the Son has the life; he who does not have the Son of God does not have the life. - 1 John 5:11-12

       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080213/c148ffa0/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated