Re: [Amc-list] Any tricks in removing the drums?

[JOE FULTON <piper_pa20@xxxxxxxxxxx>]

DO NOT REMOVE THE BIG NUT.  The drum is held onto the
hub by three litte cap screws which go through the
drum into the hub face.  Actually it is held on by the
wheel and lug nuts as well as an interference fit with
the perimeter of the hub.  The little screws could
actually be missing if a previous mechanic has not
bothered to replace them after service.  You may need
to gentle persuade the drum to come off by using a
block of wood and hammer on the edges of the drum
after removing the cap screws.

Joe Fulton


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list