Re: [Amc-list] noisy after rebuild

[Tom Jennings <tomj@xxxxxxx>]

-- Andrew Blomer <lotharamc@xxxxxxxxxxx> wrote:

> Well I think I found the problem. I should have checked when I took it
> apart the second time, but I found that I have .000 to .010 lifter
> preload. .020 to .040 is recommended by comp cams.

> So, is it a bad idea to have .090 preload?
>
> Should I get the 9.500" pushrods, and shim the rocker shaft?

Isn't this what's done with non-shaft-rocker motors? With 1.6:1 ratio, 
you'd need about .050" shim under the rocker, right?

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list