[Amc-list] Roller Camshafts for the AMC 4.0 Inline 6 - ' together at last' -

[Brien Tourville <hh7x@xxxxxxxxxxx>]

Message: 8
Date: Wed, 18 Jul 2007 18:35:24 -0400 (EDT)
From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
Subject: [Amc-list] fwd: [strokers] ROLLER CAMSHAFT - ROLLER LIFTERS
	>4.0<
To: amc-list@xxxxxxxxxxxx
Message-ID: <200707182235.l6IMZOl03855@xxxxxxxxxxxxxxxxx>

anyone here interested in a hydro roller cam for the six?  tom, your
indy motor?  this is designed to work with crane #86532 amc v8 lifters
with slightly modified tiebars.

it's steep, but if you want the very best performance...

'joe' is at roto-faze, but flash is coordinating the order.  he's
oriented around the 4.0, but of course the cam also fits all
199/232/258.

" From: "flashgordon_62" <flashgordon_62@xxxxxxxxx>
" 
" OK you have your info below and i just got off the phone with 
" joe...........we must have 6 cam ordered before he will start on the 
" Roller Cam Blanks, so tell every on you know!
" 
" The price from Joe is: $485.25 for the cam blank.
" 
" We have all the info now.  it's time the tell the world and see what 
" happen. lets keep the count here, but tell every one you know
" I will throw it at NAXJA and see how it land. any one that has ties 
" with the other jeep clubs, AMC club Please let them Know. Remember 
" this cam will also fit a 258...... and probably some of the other AMC 
" in-line six's 
" 
" 
" >                THE LAST TIME I TALKED TO JOE!!!!
" > 
" > 
" >  I asked him who he would recommend for the cam grinder for our Hyd 
" > Roller Cam.
" > 
" > He recommended (2) shops, that he uses, Both shop, he has used a lot 
" > for custom cam grinds.
" > 
" > The first place that he recommended is in California.
" > 
" > "SCHNEIDER CAMS" There # IS 619-297-0227, Take to Jerry.  I did, 'Cam 
" > grind" of any profile (said he had probably one of the most roller 
" > profiles cataloge.............Price.............$450
" > He said he could get the roller cam lifter that were will need(V8 
" > roller AMC) but didn't have a price, said that he had, or could make 
" > any length of push rods for us.
" > 
" > If you live more toward the East coast(Florida)Then Crane was his 
" > recommended cam grind shop.
" > 
" > Crane cam's, talk to Chase Night at 386-252-1151 ext.#402
" > 
" > Cam Grind $468.00, (any profile) Chrome molly push rods $80.00, V8 
" > Hyd Roller lifters ( set of 12)...Chase said that he would give us 
" > the good guy discount $337.00.
" > 
" > And when we get this far, plan on a 4-6 week proses. Apparently there 
" > is a vary long heat treatment proses for the roller cams
" > 
" > Flash.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx     





===.===






...dear God..... I hope this goes well....... ''



see, ...I left the ball with Flash ;)


at least they won't be burning MY house down if
this hits some 'bumps' - 

don't think it will - but My ass is out of Dodge.


I'd kicked this topic a few yars ago on
Strokers - lukewarm response at the time as
most had no idea.

- 
this time was different - people were talking
of Superchargers 'n 'Hair Dryers' [cough..] -

roller cams / concepts of caught their imagination
as it had mine - the 'Discovery' posts were fun,
kinda' like getting turned loose in your Grandparents
Attic -

after some preliminaries 'n calls made,

there were some Strokers who
jumped in both feet - one bought a roller lifter pair
'n stuffed it into a 4.0 block to check clearence
'n fit > no grinding necessary.... this after alot
of talk about hacking  out a 'window' in the side
of the block........ WoW!.. but the rollers just
need a 'custom' link bar - one end 'forked' as to
lock into the tab upon drop into lifter bore[s].

The Cam Blank guy was recommended to me by one of Chase's
top Techs - had worked at Crane for years - well liked 
within the Crane community - did
many many 'wild' ride roller camm'd motor developments,
does all Crane's Custom Roller Cam blank work - great to
talk with - has a few 'Freaks' of his own on the street -
total enthusiast - which helps greatly when talking
with the Strokers crowd........ long distance...

I think they've sent
him four or five different stock / aftermarket cams
to look at - more on the way from the last posts I've
read ;) ..... "...And 'loving it' ..."


Crane will cut the 'round roller blank' to a grind
that fits your particular engines specs - and your
trans./ gearing / car weight  - so MY first choice
to do the work would be Crane....I like Schniders
"Iron Cross" - 'Dee' out of the band 'Twisted Sister'
likes sporting it on his stage gear ... whatever: 

" ah Mother Beautifule Rollah..."


I seeded the waters over on NAXJA.ORG with the topic
not long ago to check for takers - they're there.

Should drop bait on www.Inliners.org too........

Can't wait for someone's bux up Dyno numbers getting
posted..... a Roller Camm'd AMC Inline 6 - streetable -
has been a 'wonder if' for years.

Two members were talking 'Blown' and 'Roller'd' so
expect an 'Ultimate Creation' in the Werks.

We'll have some input on the AW4 capabilities too -
before // after someone 'pretzels' their Cherokee 
Uni-Frame :[  ;) - 'window crakin' Fresh' - .


If you're really into the Inline AMC - you won't get
another chance until another 6 people antie up, so 
give it some serious thought.......






Me? nah...... Eagle's goin' with the 'Iron Duke' 4 .....
got..'pedigree







-- 

    =Bt=
milnersXcoupe

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.amc-list.com/pipermail/amc-list/attachments/20070719/0397c03f/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list