Re: [Amc-list] 4-Speed Wagon?

[Wrambler242@xxxxxxxxxxx]

An hydraulic clutch setup will be easiest as the pedal bushings are the same across the board on AMC's.
I'd get a set of pedals from a big AMC and go from there.
Forget about cross adapting pedal linkage, it's a nightmare. Unless someone knows what an exact bolt in is!

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different" 

 -------------- Original message ----------------------
From: "Richard Estermyer" <javelinman74@xxxxxxxxxxx>
> Just wondering and a bit of dreaming.
> Would it be possible to put a 4-speed trans in the 75 Matador Wagon?  The 
> auto trans is bleeding a lot and the bench rebuild looks around $650.  Would 
> there be pedel sets that would bolt in and linkage and such for this big 
> monster?  I believe that the trans may not be a problem as it bolts up to 
> the bell housing and probably an adjustment for the drive shaft length?
> 
> Anything else needed to know, IF, this could really be done?
> Thanks for the time, knowledge and input!
> 
> Richard
> 
> Richard Estermyer
> PhotoGraphics
> 6235 S. Mohawk Avenue
> Ypsilanti, MI 48197
> 
> 734.483.5138
> 734.417.9456 cell
> javelinman74@xxxxxxxxxxx
> 
> _________________________________________________________________
> Local listings, incredible imagery, and driving directions - all in one 
> place! http://maps.live.com/?wip=69&FORM=MGAC01
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list