Going through information that I have stashed here and there the following FORD inch Axle information surfaced. Maybe some one can find it useful. 9" rear axle lengths, Note; Some are not 9" 65-66 Mustang 57.25 inches 67-70 Mustang 59.25 inches 71-73 Mustang 61.25 inches 77-81 Versailles 58.50 inches 74 Maverick 8" 56.50 inches 75 Mustang II 8" 57.00 inches 67-73 Mustang, Torino, Ranchero, Fairlane 9" 59.25 inches to 61.25 inches 57-59 Ranchero and station wagon rears, 57.25 inches 66-77 Bronco 9", 58 inches 77-81 Granada/Versailles, 58 inches 67-71 Comet, Cougar, Mustang, Fairlane, 59.25 inches 71-73 Mustang, 61.25 inches 64 Falcon 58 inches 67 Cougar 60 inches 67 Fairlane 63.50 inches (coil springs) 72 Ford Van 3/4 ton 68 inches 73-86 65.25 inches 57-59 Ranchero and station wagon 57.25 iches (narrowest 9" housing) 66-77 Bronco 58 inches but has 5-on-5 1/2 inch diameter bolt circle 67-73 Torinos, Rancheros, Fairlanes 59.25 inches or 61.25 inches 67-71 Comets, Cougars, Fairlanes 59.25 inches Where to find the 9" rear axle 67-73 medium and big block Mustangs and Cougars 66-71 Fairlanes, Torinos, Montegos, Comets, and other Ford intermediates with big blocks 57-59 V8 Fords and Mercurys 77-81 Lincoln Versailles & Trucks Type of 9" axle housings 67-73 Mustang/Cougar - light duty, thinnest housing material, small axle bearings, 28 and 31 splines 57-68 passenger car and 1/2 ton truck - medium duty, stronger than Mustang type, 28 and 31 splines Ranchero/Torino - heavy duty thick wall housing, 3.25 inch diameter axle tubes with flat tops 69-77 Galaxies (coils), Lincolns (coils), and late pickups (leaf)- 3.25 inche dimeter all the way to the backing plate, coil housings have upper control arm mount How to recognize 9" housing centres 57 - no dimples, flat center band up the center of the rear cover, bottom drain plug 58-59 - two dimples on back of housing, flat center band, some had drain holes 60-67 - two dimples, flat center band, oil level hole in back cover 63-77 Lincoln, LTD, Thunderbirds had 9.375 inch centers, housings were cut away at the gasket surface for ring gear clearance, one curved rib at the front top portion of differential, strong but no gears Types of 9" Axles 28 spline axles cannot be shortened and resplined (they're tapered) 72 and earlier 31 spline axles have the ability to be shortened 73 and later 9" (cars) have a 5-on-5 bolt circle and the axles cannot be shortened 67-73 Mustang axles identified by wheel flange: oval hole - 28 splines two large holes and counter sunk center - 31 splines John. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.amc-list.com/pipermail/amc-list/attachments/20070710/2fa6a65d/attachment.htm _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list