Re: [Amc-list] 6cyl 232cid engine question

["RetroRalph" <retroralph@xxxxxxxxxxx>]

>From a 1968 AMC TS Manual...

Bore was 3.75" standard. and stroke generally 3.50.
______________________________________________________

Main bearing journals dia is 2.4981" -02.5001"

Main journal width:
#1 = 1.092"    +-.006"
#2-#4-#5-#6-#7  = 1.185"  +-.003"
#3 = 1.275" - 1.273"
Main bearing clearance = .001" - .002"
Main bearing Cap torque 75-85 Ft. Lbs.

Crankshaft end play  .0015" - .007"
Crankshaft end thrust bearing - Number 3 Main.
___________________________________________________________
Connecting rod bearings

Journal diameter 2.0934" - 2.0955"

Journal width  1.073"

bearing clearance  .001" - .002"

Rod cap torque  26-30 Ft Lbs

Connecting Rod side clearance .008" - .010"
______________________________________________________________
Ralph Ausmann  -  Hillsboro, OR - > <ralph.ausmann@xxxxxxxxx>
http://mysite.verizon.net/res79g4m/

 AMC List Archives CD??  See> 
http://mysite.verizon.net/res79g4m/amc/index.htm

----- Original Message ----- 
From: Arnaldo Mademilia
Sent: Saturday, July 07, 2007 8:33 PM
Subject: [Amc-list] 6cyl 232cid engine question

Does anyone know what size of piston does the 232 CID engines use?And 
what size of main and rod bearings? 


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list