Re: [Amc-list] 71 or 72 Crank?

[Todd Tomason <jayscore@xxxxxxxxxxxxx>]

Thanks Jim.  I checked it with a tape measure and it's about 1 3/4", so I've 
got a later crank.  There's a thin sleeve in the end of the crank.  I'm 
assuming this is a pilot bearing for a manual transmission, and will need to 
come out to use the auto.  

Todd

On Saturday 23 June 2007 22:58, James Shadwick wrote:
> Todd...
>
> other than the flanges...the most obvious is the hole size in the end
> of the crank....71 minus the bushing is just over one inch and the
> 72 and newer is about 1.8 inches to fit the button on the TF..TC.
>
> Jim
>
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list