Re: [Amc-list] 63 Ambassador gas tank

[Wrambler242@xxxxxxxxxxx]

I installed a return line in my filler neck.
I used 3/8" fule line, soldered it in pointing down to direct the flow into the tank, then for good measure I cleaned it all real well with solvent and put a coat of JB weld over it to reinforce it. It's solid as a rock. 
  Depending on how it is broken off you may be able to solder it, use an old fashioned iron, not a torch or electric soldering gun.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different" 

 -------------- Original message ----------------------
From: "L.D. Lyons" <ldlyons@xxxxxxxxxxx>
> Pulled the gas tank from my 63, could not get gas to the fuel pump, found
> that the overflow inlet on the tank is broke off, has anyone ever useed JB
> weld to repair on  a gas tank.
> have not checked out anything else out on the tank to figure out why I can't
> get gas, but will in time
> Thanks Butch Lyons
> 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list