Re: [AMC-List] 196 ohv performance camshaft

[Frank Swygert <farna@xxxxxxx>]

Hmmm... no one ever said anything about longer pushrods when I had mine 
reground! Wait a minute... that's because the 196 has adjustable
rockers! 0.10" doesn't make enough difference with that engine to
require longer pushrods, plenty adjustment for it. 

You had me going for just a minute! I bent a pushrod when one came
loose due to a stuck valve. Thethought ran through my mind that may
have been the problem, but then I remember I ran that engine with the
cam for 4-5 years with no problems until I parked it for four months
awaiting time and weather for a rear end bearing replacement. 

On October 11, 2006 markprice242@xxxxxxxxxxxx wrote:

> no welding involved on a cam regrind.
> They take the base circle down to increase the lift.
>  You will need longer pushrods.
> --
> Mark Price
> markprice242ATadelphia.net
> Morgantown, WV
> 


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com