Re: [AMC-List] 4 hole Flywheel (86) work w/ 3 hole Balancer?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [AMC-List] 4 hole Flywheel (86) work w/ 3 hole Balancer?



" From: Jesse <j2sax@xxxxxxxxx>
" 
" 
" I am putting an 86 360 in my 73 Commando.  When I sold
" the original 304 out of the Commando, I did not have
" time to keep the 3 hole balancer that came on it.  
" 
" So, will the flywheel that came off the 304 with the
" three bolt balancer be balanced OK with the 360 4 bolt
" balancer?

no.

with one exception i know of ['70-1 360 & 390], each displacement has
its own imbalance, thus its own flywheel.  i'm not sure about the
balancers but wouldn't be surprised to find likewise.  i don't think
the number of holes has anything to do with that, only the pulley set.

" If it is just a matter of comparing part numbers, what
" is the proper part number for a 360 flywheel that will
" work with the 4 hole balancer?  

'70-1 360 p/n 3196929
'72-? 360 p/n 3212653	- i believe this fits all post-'72.

there should be more detail in the archives...
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated