Re: 904 to T-5-WC swap
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 904 to T-5-WC swap



" From: Matt Haas <mhaas@xxxxxxx>
" 
" At 02:09 PM 3/17/2006 -0500, you wrote:
" >" From: farna@xxxxxxx
" >"
" >"
" >" 3. The bolt pattern to the transmission is the same on all 72+ AMC
" >" engines EXCEPT four cylinders. Audi uses a unique pattern, GM the SBC,
" >" and the AMC four uses the small GM pattern. There is one thing to look
" >" out for though. Six cylinder bells are 6.5" deep, and eight cylinder
" >" around 8.0" deep.
" >
" >not strictly true.  the t-14 was used behind 2bbl 290s and 304s as
" >early as '68, and the t150 and sr4 were used behind both sixes and v8s.
" >all these bells are shallow.
" <snip>
" 
" My 68 TSM says a T-15 was used behind V8's. T-15's have larger bearings on 
" the input and main shafts but are pretty much like a T-14 otherwise.
" 
" Matt

yup, in doublechecking i see you're right.  but the t-14 was used
behind 304s in the early '70s.

it's a lot like a scaled-up t-14.  the case is 10" long instead of
8.7" for example.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated