[no subject]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[no subject]



Still working on my buddy's car (70 AMX) We needed to fix some electrical problems like no dash lights,brake lights and tail lights. we fixed the tail lights (burnt fuses that looked ok) stop lights (bad switch) now we're trying to get the dash lights working. Changed the bulbs and sockets (twist in)  and cleaned the printed circuit board. I have juice at the orange lead at the headlight switch and then the trail goes cold. I didn't see if I had juice actually at the printed circuit board. I'll try that next work day. I was thinking a bad ground on the cluster. Does anyone know how that grounds? I tried jumping it with a test lead and still nothing. I did notice that the park brake light flashes with the turn directionals. Also there is a round plug with 10 or 11  wires on it I didn't want to remove that because I wasn't sure how to take it off. I was geting juice at the clock light and when I jumped that ground it worked. Put in the dash and nothing. I noticed a sheetmetal tab to jump from the cluster to the clock and I put that back in.
Sorry for the ramble but I stopped working on it because I was getting frustrated
Mike 






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated