Re: 1971 Turbo Gremlin Axle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 1971 Turbo Gremlin Axle



Gears from a Jeep will fit. Dana model 35 gears fit also. What ratio are you looking for? It might be possible to find a good used set if it's relatively common for some year or model. The gear sets will interchange from 1965 up with the exception of 196 and 199 powered cars through 1966. Those continued using the "big nut" driveshaft and have a very different pinion shaft. All 232 powered cars used a standard pinion shaft with a bolt on yoke.


On December 7, 2005 Clarence Milstead wrote:

> I decided to put new gears in my AMC Model 15 axle but can't find anyone
> that makes them. Lots of gears for the Model 20 axle though so it looks like
> I need to find one. Since AMC has been out of business for over 20 years and
> many AMC cars have been crushed, what are the best models to look for? I
> expect most Gremlins, Hornets, Spirits, and Concords were built with six
> cylinder engines. In fact, in looking through salvage yards I never saw a
> V-8 engine in any of these cars. So, what do I need to look for? I have a
> garage all ready to do the work but they couldn't find any gears either.
> Help!


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated