Return the clutch and call an A/C shop. Part might cost a little more, but you'll get what you need. They will know what other models will cross reference to the AMC. I'm sure there are other V-belt applications that will work. Or they may be able to order just the bearings. The bearings would require special tools to extract and install. If you can get to the bearings to remove them, however, find the number on the side and call a bearing supply house (yellow pages!). They can order just the bearings. On December 7, 2005 jamie smith wrote: > I ordered my A/C clutch from Autozone friday and it came in today. I went to pick it up and it has the serpentine belt pulley. My car has the v-belt set up. I imagine there probably isn't any difference in the electro magnet part of the clutch and will be no probolem using that but is it possible to take the bearing from the new (serpentine) pulley and put it in my old pulley and just use my old pulley? The guy looked it up a couple different ways and it only shows the serpentine setup. > > Jamie Smith > Spokane, WA. > > ============================================================= > Posted by wixList Archiver -- http://www.amxfiles.com/wixlist ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist