Re: brake balance
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: brake balance



On November 9, 2005 Tom Jennings wrote:

My rear brakes have been grabby since day #1 (on my 70 Hornet).
Spelunking in my notes I found out why -- the rear wheel cylinders
are .875" (7/8"), for a four-wheel-drum-brake car, and up front I've
got Bendix calipers. (I was gonna go all drum but chickened out and
switched to disks.)


On Nov 10, 2005, at 4:24 AM, AMC74Hornet@xxxxxxxxx wrote:

If the grabby rear brakes bother you just install a Wilwood in line proportional valve in the line out of the master to

Well I had ordered correct rear wheel cyls by the time you posted this ($8 each). I think your solution is actually better; I would have a range plus and minus to dial the brakes in. If the cyls don't fit or don't do what I want I'll by the valve from Summit -- it's $40. Not bad. Thanks for the great idea.








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated