On November 13, 2005 Bill Strobel wrote: > I have been working on my SC/Rambler. Last mechanical > project replace and retorque pinion bearing crush > sleeve. I have all the brakes off, wheel cylinder > disconnected, lube drained, pumpkin cover off but the > axles will not come out. I did this once in 1989 with > the hubs on and got the axles out but forgot how. How > do I get the axles out with the hub on? > > Bill Strobel > Independent Towing > Fayetteville NC > > > > __________________________________ > Yahoo! FareChase: Search multiple travel sites in one click. > http://farechase.yahoo.com Unbolt the brake backing plates and the axels should come out. They hold the bearings in. Had to do that on my 74 Hornet a few years back. "Doc" ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist