Re: 1984 AMC Eagle and Intake Manfold ID
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 1984 AMC Eagle and Intake Manfold ID
- From: Tom Jennings <tomj@xxxxxxx>
- Date: Sun, 30 Oct 2005 21:33:50 -0800
I knew the valve covers were an issue. As I mentioned in another
post, my 86 is leaking. One thing about this 84. Most valve covers
seem to have bolts around the edges to hold the cover on (as it
appears to be in the procedure that, I beleive it was Wayne, posted
the link to. But on this 84 it has 2 (I think it was 2) studs or
bolts coming up through the valve cover to hold it. Are there metal
replacements for that style?
Yeah, the aftermarket covers (like the finned aluminum job I got from
AK Jacobs) require you to tap those holes, 5/16" and 1/4" I think
(something like that) and comes with allen head bolts.
The real problem is that there simply aren't enough holes around the
perimeter, on this or any of this AMC six, really. I would like to
see one every 4 - 6 inches.
I miss my old Gen 1 V8 here -- huge, fat rubber gaskets, cover held
on with two wing-nutted studs.
Back to the Home of the AMC Gremlin