Re: 390 Distributor???
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 390 Distributor???



Internally, the distributors are the same. The lower body and shaft are different for AMC and Chevy. You can gut the the Chevy distro and put the parts inside an AMC, that's the best you can do, and will make a difference because of the recurving. Change weights, springs and all. While you're at it you might wantto check the shaft bushings in the AMC body and see if they need replacing. 

On September 8, 2005 Jerry Phillips wrote:

> Is the distributor on a '68 390 a standard mid to late '60s Delco unit?  Is it the same unit '60s small block Chevy's used?
> 
> Bottom line:  I bought a Pertronix Flame-Thrower Billet distributor for my '57 Chevy, which has a '65 or '66 283.  Will this distributor fit a '68 AMX 390?
> 
> Thanks,
> 
> Jerry Phillips
> Las Vegas
> 
> '68 AMX 390


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated