" From: farna@xxxxxxx " " On August 8, 2005 andrew hay wrote: " " > yup. if you stick with f.i. you'll need to do something about the " > cps, which normally sits on the bell. and one of the motor mount " > holes, unused in jeeps, was co-opted for the knock sensor so you'll " > have to find a metric bolt [10mm? 12mm?] and ream the bracket. " " I believe it is a 10mm bolt, but only has to be done on 87-90 models " -- no knock sensor on 91+ HO engines. I moved the knock sensor forward " on mine by drilling out and tapping another bolt boss (unused of course " -- I think it was a boss for the Eagle axle?). Not optimal location as " a light knock in a back cylinder might not get noticed, but seems to " work fine. i thought the hole was tapped for the knock sensor - unused - even on ho blocks, for compatibility reasons. the eagle diff mount boss is there somewhere. ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen adh@xxxxxxxxxxxxxxxxx and think what none thought