401 RODS
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

401 RODS



Andre,

I hadn't said anything yet because I am working on
getting a bushing that will allow us to float either a
.930 or a 1.00 pin using the same bushing.  The small
end should have been rough size about .998.  There
seems to be enough material in the small end to fit a
bushing big enough for a 1" pin.  That way we can
float the Ross pistons that already have a 1" pressed
or floating pin option.  I haven't confirmed all this
yet as we are making sure it will work.  This will
hopefully be an easy fix.

It is always something isn't it.  

Nick Alfano


To: mail@xxxxxxxxxxxx
Date: Thu, 4 Aug 2005 15:28:28 -0500
Subject: 401 RODS
Message-ID: <20050804.152833.1536.0.akjamc@xxxxxxxx>
From: Andre K Jacobs <akjamc@xxxxxxxx>

Well folks, BAD NEWS!!!!!
The new 401 rods are being pulled from sale. The small
end it too big!. 
I
had done some checking, and had my machine shop fix
the big end which 
was
too small. My machinist ask for a pin as he thought
there was a problem
there. YES there is, its too big. So if any of you
have bought these, 
you
will not be able to use them out of the box. 
Also I still have not been able to post my original
post on these rods,
sent before Nick posted info on them.
There is info about the new ( not Scat) 360 rods in
that e-mail too.

Andre " A.J." Jacobs, 
web page http://southtexasamc.tripod.com
 (830)-980-3165 , akjamc@xxxxxxxx 








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated