So I may go get that driveshaft after all. Thanks, Joe Fulton --- Armand Eshleman <aje1@xxxxxxxxxxxxxxx> wrote: > I have an SR-4 from a 79 AMX and a WC T-5 from a > Mustang. > The output yokes slide over the splines the same. > The Mustang > yoke has a larger u-joint. That's the only > difference on the parts > I found. > Armand > > > Date: Mon, 18 Jul 2005 13:22:28 -0400 (EDT) > Message-Id: > <200507181722.j6IHMSq09487@xxxxxxxxxxxxxxxxx> > From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) > To: mail@xxxxxxxxxxxx > Subject: Re: SR-4/T-5 Yoke? > > " From: JOE FULTON <piper_pa20@xxxxxxxxxxx> > " > " This one is probably for Andrew: > " > " Is the SR-4 tranny yoke the same as the mid-80s WC > T-5 > " yoke? > > i don't positively know, but i have heard that the > sr4 like the t150 > is a straight ford tranny not customized for amc in > any way, and that > direct swaps of sr4s between amc and ford > applications are possible. > given that, i rather expect it does have the normal > ford 28-spline > output like the wc t5 does. > ________________________________________________________________________ > Andrew Hay the > genius nature > internet rambler is to > see what all have seen > > adh@xxxxxxxxxxxxxxxxx and > think what none thought > > > > > > >