Re: American exhaust headers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: American exhaust headers



The 2000 up split manifolds ports are
1 5/16" wide
1 1/8" high
Gasket will allow porting to
1 5/16" high
1 7/16" wide
How this compares to the old ports I don't know.
I don't have any off to look at, nor do I have any gaskets.
The manifolds look like they have plenty of space to allow them to be slid up or down to align with different port heights.
Some day, I'll look into actually ligning one up to a head and see what's what.

Mark Price
mpriceATwestco.net
Morgantown, WV
69 AMC rambler, 4.0L, EFI, 5 speed 
65 Ambassador Conv, 327 AUTO, Basketcase
01 S-10 CREWCRAP 4X4



---------- Original Message ----------------------------------
From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx
Date:  Thu, 9 Jun 2005 13:07:25 -0400 (EDT)

>" From: farna@xxxxxxx
>" 
>" On June 7, 2005 mail@xxxxxxxxxxxx wrote:
>" 
>" > I picked up a 4.0 litre Jeep to go along with my 258
>" > bottom end. I also found a I6 Jeep header set-up at
>" > the swap meet cheap. I remember someone stating what
>" > interference problem to expect putting this exhaust in
>" > my American, but I don't recall what they will be.
>" > Since my 68 beater is getting an engine transplant I
>" > test fit it and I couldn't get a good handle on the
>" > cleaence, as the stock stuff is still in the car. What
>" > should I expect?....Russ
>" 
>" 
>" It depends on the year of the header. Stock 87-90 Jeep exhaust will fit
>" with no problems. 91+ exits further forward. There may be clearance
>" issues around the crossmember and/or engine mount. Jeeps don't have a
>" crossmember under the engine. 
>
>another possiblilty is the '99-up 4.0 iron split exhaust.  so far as
>i've heard the bolts are all in the right places, but the #0331 head
>they go with has the smallest ports of any amc six head and i'm
>concerned the manifold ports would be tiny too.
>
>but they'd be tough and durable, and you can fab the y-pipe - or duals
>- to get around anything you have to.
>________________________________________________________________________
>Andrew Hay                                  the genius nature
>internet rambler                            is to see what all have seen
>
>adh@xxxxxxxxxxxxxxxxx                       and think what none thought
>
>
>
>
 

 



 

                   





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated