Re: American exhaust headers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: American exhaust headers



As I've said before, The 91 up 4.0L stock tube exhaust manifold does fit the American body with no problems! Been there done that! Bought the friggin T-shirt!
:] Mine is modified to remove the original donut section and feed into 2 1/2 pipe. Stock also fits fine. Just needs a custom pipe to hook it up, Maybe. A XJ pipe may work, but I think it will hang to low.
  CJ/ Wrangler aftermarket headers usually hit the Crossmemebr and are way to low.
XJ headers may work or not, but should work unless they hang to low.
 FSJ haedars?????
Mark Price
mpriceATwestco.net
Morgantown, WV
69 AMC rambler, 4.0L, EFI, 5 speed 
65 Ambassador Conv, 327 AUTO, Basketcase
01 S-10 CREWCRAP 4X4



---------- Original Message ----------------------------------
From: Tom Jennings <tomj@xxxxxxx>
Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx
Date:  Thu, 9 Jun 2005 10:30:15 -0700 (PDT)

>On Thu, 9 Jun 2005 farna@xxxxxxx wrote:
>
>> It depends on the year of the header. Stock 87-90 Jeep exhaust will fit with no problems. 91+ exits further forward. There may be clearance issues around the crossmember and/or engine mount. Jeeps don't have a crossmember under the engine.
>
>Not sure if this is worth anything, but on the 70 Hornet I've got
>the center-output manifold; the down pipe is steeply angled, but
>does clear OK. A more-rear exit would have made it more straight
>down, cleaner looking.
>
>Right about the level where the exhaust exits the manifold, the
>floorpan kicks back, making for decent clearance, on
>Hornet/Gremlin.
>
>
>>
>> On June 7, 2005 mail@xxxxxxxxxxxx wrote:
>>
>>> I picked up a 4.0 litre Jeep to go along with my 258
>>> bottom end. I also found a I6 Jeep header set-up at
>>> the swap meet cheap. I remember someone stating what
>>> interference problem to expect putting this exhaust in
>>> my American, but I don't recall what they will be.
>>> Since my 68 beater is getting an engine transplant I
>>> test fit it and I couldn't get a good handle on the
>>> cleaence, as the stock stuff is still in the car. What
>>> should I expect?....Russ
>>>
>>>
>>>
>>> __________________________________
>>> Discover Yahoo!
>>> Use Yahoo! to plan a weekend, have fun online and more. Check it out!
>>>
>>> http://discover.yahoo.com/
>>>
>>>
>>>
>>> .
>>
>>
>> =============================================================
>> Posted by wixList Archiver -- http://www.amxfiles.com/wixlist
>>
>>
>>
>
>>
>
>
>
>
 

 



 

                   





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated