It depends on the year of the header. Stock 87-90 Jeep exhaust will fit with no problems. 91+ exits further forward. There may be clearance issues around the crossmember and/or engine mount. Jeeps don't have a crossmember under the engine. On June 7, 2005 mail@xxxxxxxxxxxx wrote: > I picked up a 4.0 litre Jeep to go along with my 258 > bottom end. I also found a I6 Jeep header set-up at > the swap meet cheap. I remember someone stating what > interference problem to expect putting this exhaust in > my American, but I don't recall what they will be. > Since my 68 beater is getting an engine transplant I > test fit it and I couldn't get a good handle on the > cleaence, as the stock stuff is still in the car. What > should I expect?....Russ > > > > __________________________________ > Discover Yahoo! > Use Yahoo! to plan a weekend, have fun online and more. Check it out! > > http://discover.yahoo.com/ > > > > . ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist